Precision casting & CNC machining since 2000
Precision Casting, Trusted Worldwide

News

Micro Die Casting for Smart Glasses and AR/VR Components

Smart glasses and AR-VR headsets pack a display, batteries, sensors and a wireless stack into a frame that has to weigh under fifty grams and still feel like eyewear. That package is mostly a problem of thin-wall, precise metal parts: the front frame, the hinge bodies and the small structural shells that hold the optics in alignment. Die casting, done at micro scale, is one of the few processes that forms those shapes net, in volume, without a stack of machined plates.

This guide covers where micro die casting fits in wearable electronics, what the process can hold, and how to design a part that survives both the mould and the product.


1. Why wearable housings are hard

A phone case tolerates sloppy walls. A smart-glasses frame does not. The weight budget is tiny, the walls are thin, and the part has to sit against skin and stay aligned with a display through heat, drops and months of opening and closing. Add electromagnetic shielding for the wireless electronics and the part becomes a precision component, not a cover.

Die casting answers the weight and integration problem directly: one thin-wall part replaces several, and the metal gives the rigidity that plastic frames struggle to match at the same mass.

2. Zinc and aluminium at micro thin-wall

Two alloys cover most wearable housings. Zinc, especially Zamak 3, fills the finest thin-wall and most intricate features and gives a dense, premium feel in the hand. Aluminium is lighter and reads as higher-end in some markets, at a slightly thicker wall floor.

Practical floors run around 0.4 millimetre for zinc and 0.8 millimetre for aluminium in thin-wall die casting, with the casting held to tight tolerances on features that matter and finished by machining where the part cannot form them directly. Our comparison of zinc and aluminium for electronics sets out when each alloy wins, and our guide to precision zinc for small parts covers what tight tolerance looks like on a real production part.

3. Design rules that decide the yield

Micro thin-wall lives or dies on the basics. Get these right before the tool is cut:

  • Wall thickness kept uniform so the metal fills evenly and the part cools without warp

  • Draft on every face so the tiny part releases without sticking or scoring

  • Ribs and bosses placed to add stiffness without thickening the wall

  • Part consolidation, merging a bracket and a shell into one casting to cut joints

These are the same rules that govern larger thin-wall work, which is why our thin-wall die casting guide is worth reading before you settle the frame geometry.

4. Feel, haptics and the premium impression

In a wearable, the metal is also the experience. Zinc has a density and temperature in the hand that reads as quality, which is why it shows up in consumer electronics where the product is held all day. The same material choice that satisfies the structural need also satisfies the marketing one, a rare overlap. Our notes on zinc haptics in consumer electronics go deeper on why the alloy feels the way it does.

5. What to specify on the drawing

For a wearable housing, state the alloy, the wall thickness floor, the tolerance on the alignment and hinge features, and the surface finish, since the frame is also the product exterior. Shielded versions should name the EMI requirement so the wall and any coating are chosen to meet it.

Budget for the tool and the first-article validation. Micro thin-wall rewards a careful sample stage: a short run that proves fill, warp and tolerance before volume protects the program from a tool that was cut to the wrong assumptions.

6. A realistic production path

Start from the frame weight and the alignment-critical features, not from a target price. Those two fix the alloy and the wall, and the rest of the specification follows. A caster who can hold the thin wall and the tight feature, and who validates on a sample first, will save the program from late reworks that plastic-tooling lead times make expensive.


Designing a smart-glasses frame or wearable housing?

Send the concept or the drawing with the weight target and the alignment features that must hold. We will propose the alloy, the wall thickness and the validation path to a qualified sample.

Tolerance ruler infographic: thin-wall die casting limits for AR-VR smart glasses housings, zinc 0.4mm and aluminium 0.8mm walls with tight feature tolerances
Micro thin-wall is won on the basics: uniform wall, draft, ribs and part consolidation before the tool is cut.

Authoritative references

Independent third-party standards and industry bodies, provided for further reading. Sureton is not responsible for third-party content.

Latest News

Small Molded Parts with in Days

Sureton complete Die Casting and CNC machining service will accompany your brand project from the prototype construction to the end metal precision parts manufacturing.

Scroll to Top
Sureton Company Logo – Precision Manufacturing & Industrial Solutions

Get in Touch

If you cannot find a suitable product, please leave a message or contact us. We have a dedicated technical team to serve you.

Sharing Your 2D Drawings & 3D Models Will Help Our Engineers to Quote Faster.

Note that, Max 100MB/file, Support: pdf, dwg, dxf, drw, iges, igs, ipt, jpg, jpeg, it, step, stp.stl, sat, sldasm, sldprt, siddrw, png.svg,x_t,xb,3dxml, 3mf, zip…If your file is not supported, please compress it into zip and upload