Precision casting & CNC machining since 2000
Precision Casting, Trusted Worldwide

News

Choosing a Die Casting Partner: What to Verify Before RFQ

Four verification dimensions for a die casting partner: capability, quality system, supply chain, and commercial terms, each with the question a buyer should ask before the RFQ
Four checks to qualify a die casting supplier before the RFQ. The questions matter more than the brochure.

Most sourcing problems show up after the tool is cut. By then the deposit is spent, the lead time is booked, and the only move left is to argue. A couple of hours of verification before the RFQ goes out removes most of that risk, and it is the part buyers skip most often.

This is a buyer side checklist. It is not about whether aluminum or zinc is the right alloy, that question has its own guides. This is about whether the shop you are about to send drawings to can actually deliver the part you specified, and whether you will be able to prove it later.

1. Why a pre-RFQ check pays for itself

A supplier that looks fine on a homepage can fall apart on three specifics: it cannot hold the tolerance you drew, it outsources the operation you assumed was in house, or it cannot show a certificate that maps to the batch you received. None of these show up in a quote. All of them show up in the first production lot.

The check takes one call and a short document request. If a supplier pushes back on sharing basic evidence, that resistance is itself the answer.

2. Capability: can they actually make the part

Start with the geometry, not the brochure. Ask for parts they have run in the same process family, in the same alloy, near your wall thickness and tolerances.

Press range. Confirm the tonnage range covers your part. Sureton runs high pressure die casting across the 88T to 800T range, which covers most small to mid size components but not large structural castings. If your part needs a bigger press, the shop should say so before quoting, not after the first shot fails.

Machining backing. Die casting rarely ships as cast. Find out whether the secondary machining, drilling, and threading happen in house or get subcontracted. In house work keeps one quality owner; subcontracted work means you are relying on a chain the supplier manages but may not control.

What to ask. “Which of my operations stay inside your walls, and which go out?” A straight answer tells you more than a capability list.

3. Quality system: the documents that matter

Certificates on a wall are not the same as a quality system that runs. The documents that actually tell you something:

  • ISO 9001 certification. This is the baseline. It means the shop has documented, audited processes for how it makes and checks parts. Ask for the current certificate, not a photo from three years ago.

  • IATF 16949, if your customer requires it. For automotive programs this is often mandatory. For non automotive parts it is a plus, not a substitute for ISO 9001. Do not let a supplier treat it as the only proof of quality.

  • First article and lot inspection records. Ask to see a sample first article report and a lot inspection sheet from a similar job. If they cannot show one, they are not running inspection as a system.

The red line: a shop that says “we inspect everything by eye” has no inspection system you can audit.

4. Supply chain: own plant versus trader

This is the dimension most buyers miss. A company that answers your RFQ may be a trading desk reselling another factory’s parts. That is not automatically wrong, but you should know which it is before you sign.

Own plant. A supplier with its own foundry can walk you through the line, show you the batch records, and trace a certificate to the melt. That traceability is what your own customers will ask for.

Partner network. Some capable suppliers run a mix: own plant plus a vetted partner network for overflow or special processes. That is workable if the lead supplier stays accountable for the result and the paperwork.

What to ask. “If my part is made off your floor, whose name is on the certificate, and can I audit that line?” A trader that cannot answer is a trader you should not onboard blind.

5. A one page supplier scorecard

Use this as the first screening. Score each line before you shortlist.

DimensionWhat to askGood answerRed flag
CapabilityParts run in same alloy and tolerance?Similar job, with photos or samples“We can do anything”
Press fitTonnage covers my part?Exact range statedVague or silent
QualityISO 9001 current? Inspection records?Valid cert, sample FAIExpired or none
Supply chainOwn plant or trading?Clear, auditableEvasive
ToolingWho owns the mold?Buyer owns, in writingSupplier keeps it
TraceabilityCert maps to my batch?Yes, batch linkedNo

6. Red lines you should not cross

Two items end the conversation regardless of price.

Tool ownership. The mold is your asset. Put it in the contract that you own the tooling and can take it elsewhere. A supplier that insists on keeping it is charging you twice.

Certificate to batch mapping. A material certificate with no batch number, or a batch number that does not match the box you received, is not evidence. It is paperwork. Your customers will ask for the real link, so ask for it first.

7. What Sureton shares with buyers

We run on ISO 9001 as the base quality system, supported by environmental and safety management systems, with documented first article and lot inspection on the jobs that need it. For automotive programs we hold IATF 16949.

On traceability, our batch records link the melt, the casting date, and your purchase order, and that link travels on the box and the certificate. If you want to see the line before you commit, we will walk you through it.


Send us the drawing, not just the RFQ

The fastest way to test a supplier is to hand them one real part. Send us your drawing and the tolerances that keep you up at night. We will tell you, before any quote, whether we can hold them and where the risk sits.

Related reading: Zinc vs aluminum: a total cost comparison if you are still deciding on alloy.

Authoritative references

Independent third-party standards and industry bodies, provided for further reading. Sureton is not responsible for third-party content.

Latest News

Small Molded Parts with in Days

Sureton complete Die Casting and CNC machining service will accompany your brand project from the prototype construction to the end metal precision parts manufacturing.

Scroll to Top
Sureton Company Logo – Precision Manufacturing & Industrial Solutions

Get in Touch

If you cannot find a suitable product, please leave a message or contact us. We have a dedicated technical team to serve you.

Sharing Your 2D Drawings & 3D Models Will Help Our Engineers to Quote Faster.

Note that, Max 100MB/file, Support: pdf, dwg, dxf, drw, iges, igs, ipt, jpg, jpeg, it, step, stp.stl, sat, sldasm, sldprt, siddrw, png.svg,x_t,xb,3dxml, 3mf, zip…If your file is not supported, please compress it into zip and upload